- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Mate's SuperMax tool coating
SuperMax works well on Mate’s M4PM, M2 and Durasteel punches in round, rectangle, oval and square punch configurations.
- September 24, 2015
- Product Release
- Fabricating
Mate’s new SuperMax tool coating answers today’s requirements for high performance, longer lasting punch press tooling. Providing a hard, wear resistant and lubricious coating, SuperMax acts as a barrier between the punch and sheet metal, greatly improving stripping and extending tool life.
SuperMax provides more hits between sharpening, which reduces machine downtime. SuperMax also reduces galling, slug pulling and corner breakdown enhancing the quality and efficiency of the punching process.
Outperforming currently available premium coatings by 2 to 8 times, SuperMax is applied using the very latest nano-layer technology. It is a harder, denser film that greatly increases wear resistance and a much lower friction coefficient of approximately 20 per cent. This lower friction means less heat build-up, less galling (adhesion) and much longer tool life.
SuperMax works well on Mate’s M4PM, M2 and Durasteel punches in round, rectangle, oval and square punch configurations. Its application effectiveness includes 3000 and 5000 series aluminum, galvanized and stainless steels, pre-painted material, vinyl coated material and fiberglass.
For more information, visit www.mate.com.
subscribe now
Keep up to date with the latest news, events, and technology for all things metal from our pair of monthly magazines written specifically for Canadian manufacturers!
Start Your Free Subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of Canadian Metalworking.
Easily access valuable industry resources now with full access to the digital edition of Canadian Fabricating & Welding.
- Trending Articles
Aluminum MIG welding wire upgraded with a proprietary and patented surface treatment technology
CWB Group launches full-cycle assessment and training program
Achieving success with mechanized plasma cutting
Hypertherm Associates partners with Rapyuta Robotics
Brushless copper tubing cutter adjusts to ODs up to 2-1/8 in.
- Industry Events
MME Winnipeg
- April 30, 2024
- Winnipeg, ON Canada
CTMA Economic Uncertainty: Helping You Navigate Windsor Seminar
- April 30, 2024
- Windsor, ON Canada
CTMA Economic Uncertainty: Helping You Navigate Kitchener Seminar
- May 2, 2024
- Kitchener, ON Canada
Automate 2024
- May 6 - 9, 2024
- Chicago, IL
ANCA Open House
- May 7 - 8, 2024
- Wixom, MI